Delflesko (USA)

PosiTector 6000

Digital Coating Thickness Gages for ALL Metal Substrates

The rugged, fully electronic PosiTector 6000 Coating Thickness Gage uses magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals, accurately and quickly.
Conforms to ISO 2178/2360/2808, ISO 19840, ASTM B244/B499/D1186/D1400/D7091/E376/G12, BS3900-C5, SSPC-PA2, US Navy NAVSEA PPI 63101-000, US Navy NAVSEA 009-32, AS 2331.1.4, AS3894.3-B and others.

PosiTector® 200

Coating Thickness Gages for Non-Metal Substrates

Non-destructively measures a wide variety of applications using proven ultrasound technology. Measure coating thickness over wood, concrete, plastic, and more. Advanced models measure up to 3 layers with graphics.

  • Ready to measure—no calibration adjustment required for most applications
  • NEWLarger 2.8″ impact resistant color touchscreen with redesigned keypad for quick menu navigation
  • NEWWeatherproof, dustproof, and water-resistant—IP65-rated enclosure
  • PosiTector interchangeable platform —attach any PosiTector probe to a single gage body
  • USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software
  • Certificate of Calibration showing traceability to NIST or PTB included (Long Form)

  • Conforms to ASTM D6132 and ISO 2808

PosiTest® AT

Pull-off Adhesion Testers

Measures adhesion of coatings to metal, wood, concrete and other rigid substrates.

  • Select from four Stand-offs – 20 mm, 50 mm, 50×50 mm Tile and 50 mm C1583
  • Environmentally sealed enclosure—weatherproof, dustproof and shockproof—meets or exceeds IP65
  • Inexpensive, single-use dollies eliminate cleaning for re-use and can be kept as a permanent record
  • Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces
  • 10, 14, 20 or 50 mm dollies maximize capability and measurement resolution across a wide range of bond strengths
  • Calibrated and certified to ± 1% accuracy using a NIST traceable load cell
  • Certificate of Calibration showing traceability to NIST included (Long Form)

Conforms to international standards including ASTM C1583/D4541/D7234, ISO 4624/16276-1,
EN 1542/12004-2, AS/NZS 1580.408.5 and others

PosiTector® SPG

Surface Profile Gages for Blasted Steel, Textured Coatings, and Concrete Profile

Surface Profile Gages use a digital depth micrometer to measure and record peak to valley surface profile heights in preparation for the application of coatings

  • NEWLarger 2.8″ impact resistant color touchscreen with redesigned keypad for quick menu navigation
  • NEWWeatherproof, dustproof, and water-resistant—IP65-rated enclosure
  • Alumina wear face and tungsten carbide tip for long life and continuous accuracy—field replaceable
  • PosiTector interchangeable platform—attach any PosiTector probe to a single gage body
  • Fast measurement rate of over 50 readings per minute—for quickly measuring large surfaces
  • USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software
  • Certificate of Calibration showing traceability to PTB included (Long Form)

Conforms to ASTM D4417-B, ASTM D8271 (SPG TS only), AS 3894.5-C (with optional 30° tip),
U.S. Navy NAVSEA NSI 009-32, US Navy NAVSEA PPI 63101-000, SSPC PA 17, SANS 5772, and others

PosiTector® GLS

Gloss Meter

Portable gloss measurement for all surface finishes

  • Larger 2.8″ impact resistant color touchscreen with redesigned keypad for quick menu navigation
  • Weatherproof, dustproof, and water-resistant gage body—IP65-rated enclosure
  • Automatic Diagnosis and Auto Calibration performed upon power-on using the protective base plate with integrated calibration standard (tile)
  • Fast measurement speeds of 60+ readings per minute
  • 2 Powerful Scan Modes for quantifying large surfaces (Advanced models only)
  • USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software
  • Certificate of Calibration showing traceability to NRC for both the probe and gloss standard included

Conforms to ASTM C584/D523/D4039, ISO 2813/7668, DIN 67530, JIS Z 8741, AS/NZS 1580.602.2

PosiTector® DPM

Dew Point Meters for Environmental Monitoring

Measures and records climatic conditions including: relative humidity, air temperature, surface temperature, dew point temperature, wind speed, and difference between surface and dew point temperatures.

Ideal for surface preparation as required by ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7, and US Navy NSI 009-32.

  • NEWLarger 2.8″ impact resistant color touchscreen with redesigned keypad for quick menu navigation
  • NEWWeatherproof, dustproof, and water-resistant—IP65-rated enclosure
  • Fast response precision sensors provide accurate, repeatable readings
  • Auto Log mode records environmental parameters at user selected time intervals
  • PosiTector interchangeable platform—attach any PosiTector probe to a single gage body
  • USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software
  • Certificate of Calibration showing traceability to NIST included (Long Form)

Conforms to ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7, US Navy NSI 009-32, and Navy NAVSEA 009-32

 

Get In Touch

Falcon Lab LLC is a professionally managed material testing equipment company based in the Oman, having branch offices in Kuwait and Qatar.

Quick Links

Address

Building no-522, 8th floor, Office no- 85, Al Jami Al Akbar Street, Nr. National Center for Statistics Ghala, Muscat, Oman.

Phone

+968 24503450
+968 94593114

Email

sales@falconlaboman.com